Veritas Bench Blade

Tuotekoodi: 212617-05G2210
21,20 €
Heti varastosta
Lähetysaika n. 1-3 arkipäivää
Toimituskulut alk. 10,00 €Nouto myymälästä: 0,00 €
 Lisää ostoskoriin
This is essentially a low-profile bench dog with a quick-release sliding jaw for holding work. Dubbed a "blade" due to its flat design, it projects just 1/4" above a work surface to permit maximum access to a workpiece. Used much like a toggle clamp, it has a thumb-operated eccentric cam lever to control the sliding jaw, so you can quickly secure or release work. With 1/4" range of travel, the jaw has limited throw, but applies up to 300 lb of clamping force. Flats on the cam provide secure stops at 1/8" and 1/4" of travel. The 1-1/2" x 1/4" jaw face has a 5° inward cant to help hold wood securely. The cam and jaw are cast steel, heat-treated for surface hardness, and the post and wedge-lock mechanism are turned steel. The standard post version is for use in a through-hole or a blind hole that is at least 1-7/8" deep. The wedge-lock version is usable at any angle from horizontal to vertical, and anchors firmly in a through-hole in material as thin as 5/8" (depending on the strength of the material), or in a blind hole that is a minimum of 1-3/8" deep. Both styles of post are available sized for 3/4" or 20mm diameter dog holes.
  • Paino: 0.20 kg
Tuotteen toimituskulut
Matkahuollon toimitus kotiovellesi 14,00 €
Nouto Postista 12,00 €
Nouto Postin automaatista 12,00 €
Postin kotiinkuljetus 23,90 €
Nouto myymälästä 0,00 €
Ilmainen toimitus näille toimitustavoille yli 150,00 € ostoksista.
Nouto Matkahuollosta tai Matkahuollon Pakettipisteistä 10,00 €
Nouto Matkahuollosta 10,00 €