Erikoisterät

Machining of this joint is carried out by routing one piece with the inside face on the table. The matching corner inside face is machined upright against the fence. Make sure that the cutter is...

D40 mm B28 mm E6.0 mm OL96 mm Shank Diameter1/2 inch Timber thickness min.11 mm Timber thickness max.36 mm

D32 mm C38 mm B16 mm R9.5 mm R212.5 mm Shank Diameter1/2 inch

Vaaditaan helpotusleikkaus ennen tämän terän käyttöä. Vain mekaaninen MEC-syöttö.

D 22 mm C 25 mm B 16 mm R 3 mm Shank Diameter 1/2 inch

D40.0 mm D231 mm C32 mm Shank Diameter1/2 inch Overall length70 mm Timber thickness min.13 mm Timber thickness max.25 mm

D42 mm C14.3 C24.0 mm A45 degrees Shank Diameter1/4 inch Overall length54.5 mm Timber thickness min.8 mm Timber thickness max.12 mm

Ideal for hiding pipes and cables. Part of curve can be used for producing decorative edges.An initial slot is required before using the ball groovers.D 12.7 mm D2 6.5 mm Overall length 58 mm R 6.35...

D1 7/64 inch D28 mm D29.5 mm C1 3/16 inch C30 mm R22 mm R218 mm Overall length70 mm Shank Diameter1/4 inch

D 35 mm OL 60 mm Shank Diameter 8 mm Recommended speed 1000-20000 rpm

D 25 mm C 20 mm R 10 mm Overall length 60 mm Shank Diameter 1/4 inch

Range of small diameter shank cutters for Mini CNC router carving machines.For carving.Two flute upcut spiral. D13.7 mm Cut length15 mm R10.5 mm A5.5 degrees Overall length50 mm Shank Diameter4 mm For...

Range of small diameter shank cutters for Mini CNC router carving machines.For carving.Single flute flat style. D13.97 mm Cut length15 mm R11.5 mm A2 degrees Overall length50 mm Shank Diameter4 mm For...

They are designed for countersinking mild steel, iron and plasticsD 12.5 mm Overall length 40 mm Shank length 19.5 mm Shank Diameter 1/4 inch Flutes 5

Range of small diameter shank cutters for Mini CNC router carving machines.For carving.Two flute upcut spiral D12.5 mm Cut length12 mm Overall length50 mm Shank Diameter4 mm For materialWood, Acrylic...

Range of small diameter shank cutters for Mini CNC router carving machines.For carving.Two flute upcut spiral. D13.96 mm Cut length15 mm Overall length50 mm Shank Diameter4 mm For materialWood...