Trend

Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising. Use on softwoods, hardwoods, MDF, plywood and chipboard. All cutters have a bottom cut feature....

Threaded rods that extend the standard rods on the NCOMPASS/A allowing an increase in radius length of 560mm. Two pairs of rods. Rod 8mm diameter x 280mm length. Also can be used with a standard...

Kaksileikkuinen terä erikoispitkällä varrella. Syvä uritus, huullokset ja liitokset. Hyödyllinen mallityössä, kun mallin paksuus rajoittaa syvyyttä. Erityistä varovaisuutta on noudatettava...

D 3/16 inch D 4.8 mm C 1/2 inch C 12.7 mm R 2.4 mm Shank Diameter 1/4 inch

D 5/8 inch D 15.9 mm C 14 mm OL 54 mm A 104 degrees Kara 6,35 mm ( 1/4 inch)

D 1/4 inch D 6.35 mm C 1 inch C 25.4 mm B 6.35 mm A 90 degrees Overall length 76.5 mm Shank Diameter 8 mm

Kokonaispituus 63.5 mm Pituus sis. kierreosa 35.5 mm Kierteen pituus 14.5 mm Karan halkaisija 8 mm

D 3/4 inch D 19.1 mm C 3/4 inch C 19.1 mm Overall length 59.5 mm Shank Diameter 8 mm

D 5/32 inch D 4 mm C 7/16 inch C 11 mm Shank Diameter 8 mm

Ohut sirkkelinterä. Soveltuu hyvin akkusirkkeliin. Katkaisuterä.

D 13/64 inch D 5 mm C 5/8 inch C 16 mm Ol 66 mm Shank Diameter 8 mm

D3/8 inch D9.5 mm D25/32 inch D24 mm C8 mm Shank Diameter1/4 inch hex

Clamping force 150 kg E 50 mm A 160 mm B 53 mm Fixing hole spacing (length) 26.5mm centre to centre Fixing hole spacing (width) 25mm centre to centre Fixing hole width 8.5mm...

D 1/2 inch D 12.7 mm C 1 inch C 25.4 mm OL 66 mm Shank Diameter 8 mm

D 1/2 inch D 12.55 mm C 1 inch C 25.4 mm OL 66 mm Shank Diameter 8 mm

D 11.1 mm | C 25.4 mm | OL 66 mm | Kara 6,35 mm

Trend Craft Pro 1/4 tuuman (6,35 mm) varren suora jyrsinterä - Trend ECL -jigiin Kaksi uraa olevaa kovametallista valmistettua TCT-kärkeä siistimpiin leikkausreunoihin ja nopeaan hukkajätteen...

D 5/32 inch D 4 mm C 7/16 inch C 11.1 mm Ol 60 mm Shank Diameter 1/4 inch

Reduction sleeve is used to reduce the collet size to take cutters with smaller shanks. Should only be used as a stop-gap, as the the correct size collet is recommended. Should not be used for...

OL 61 mm Spigot length incl thread 20 mm Spigot thread length 18 mm Diameter 18.5 mm Shank Diameter 1/2 inch

Laakeroidut profiiliterät ovat ihanteellisia mallineen kanssa käytettäväksi. Käytä vain reunojen siistimiseen ja leikkaamiseen. Erityistä varovaisuutta on noudatettava leikkurin rikkoutumisen...

Tarkka itsekeskittävä puuporanterä ohjausreikien poraukseen saranoita ja lukkolevyjä varten. Pikaistukoihin soveltuva 1/4 tuuman kuusiovarsi. High Speed Steel (HSS) -poranterä pidentää...

D 5 mm C 35 mm OL 57 mm Shank Diameter 8 mm

Includes: 1 x Hand driver 10 x Torx bits 3 x Pozi bits 3 x Phillips bits 4 x Flat bits 7 x hex bits 3 x Robertson bits 1 x Magnetic holder

Ideal for sanding and hand planing.

Includes:1 x Drill Bit 3/32"1 x Drill Bit 7/64"1 x Drill Bit 1/8"1 x Quick change shankMain body adaptor diameter 17 mmOverall length 102 mm

Trend Craft Pro 1/4in shank 'V'groove cutter 12.7mm diameter Two Flute Carbide tips.

D 1/4 inch D 6.3 mm C 45/64 inch C 18 mm Overall length 77 mm Shank Diameter 8 mm

Shank Diameter 1/4 inch hex Plug size 12 mm

Shank Diameter 1/4 inch Plug size 10 mm

Size68.5 mm x 25.4 mm x 3.6 mmGradeExtra coarseGrit220 (nom. 60 micron)ColourBlack

Threaded inserts have enlarged flange ends to prevent them from 'pulling out' after continual usage.The inserts need to be located from the underneath.Thread M6Hole size 9 mm...

Length 67 mmWidth 67 mmHeight 25 mm

Reduction sleeve is used to reduce the collet size to take cutters with smaller shanks. Should only be used as a stop-gap, as the the correct size collet is recommended. Should not be used for...

D 8 mm C 25 mm Ol 68.5 mm Shank Diameter 8 mm

Heavy duty fabric tool holder. With elastic pockets to hold Trend Snappy shanks. Supplied with a Trend Snappy pencil. Tool holders have a belt strap and are hook & loop fastening. Tool contents not...

D3 mm C3/8 inch C9.5 mm Ol59 mm Shank Diameter8 mm

D 15/64 inch D 6 mm C 9/32 inch C 6.9 mm Overall length 57.5 mm A 98 degrees Shank Diameter 1/4 inch

Range of small diameter shank cutters for Mini CNC router carving machines.For carving.Two flute upcut spiral D12.5 mm Cut length12 mm Overall length50 mm Shank Diameter4 mm For materialWood, Acrylic...